Possible Solution 1 : The error code presented is in hexadecimal format that you need to convert to decimal format.
To do this, you need a scientific calculator, and the calculator included with Windows operating systems is well suited to this task. Click Start , and then point to All Programs. Point to Accessories , and then click Calculator. Select Hex , and then enter the last four digits of the code—in this case, , as shown in Figure 1.
In the case of the error code provided here, it translates to "The specified network name is no longer available.
This information indicates that a networking problem may exist on the target computer or between the target computer and the server on which the deployment share resides.
These problems might include network drivers not being installed properly or a mismatch in speed and duplex settings. The following sections provide examples of how to use the MDT log files to troubleshoot the deployment process:.
Problem: An error occurs while running a deployment that used a CustomSettings. For clarity, the log file contents above have been represented as they appear while being viewed using CMTrace. Possible Solution: The issue, as pointed out on the first line of the log file sample, is that permission to access the database was denied. Therefore, the script cannot establish a secure connection to the database, possibly because a user ID and password were not available.
As a result, database access was attempted using the computer account. The easiest way to work around this issue is to grant everyone Read access to the database. Prior to embarking on in-depth troubleshooting processes, review the following items and ensure that any associated requirements have been met:.
Installation source files that are blocked for security reasons as described in Blocked Executables. Loss of network connectivity as described in Lost Network Connections. Installation error while installing the Microsoft Office system or related files as described in The Microsoft Office System. Problem: If installation source files are downloaded from the Internet, it is likely that they will be marked with one or more NTFS file system data streams.
The installation will not proceed until you click Run at the prompt. Possible Solution 1: Right-click the installation source file, and then click Properties. Repeat this process for each installation source file that is blocked by the existence of one or more NTFS file system data streams.
The Streams utility can remove NTFS file system data streams from one or more files or folders at once. Problem: An installation may fail if it installs device drivers or alters device and network configurations.
These changes may result in a lapse in network connectivity that causes the installation to fail. This script is designed to tweak the advertisement to enable download and execute.
Problem: While deploying the Office system and including a Windows Installer patch MSP file, the installation may fail with error code For more information about deploying updates during the installation, see Deploying the Office system. For more information about configuring this setting, see Overview of Office System Deployment.
Problem: MDT task sequences are processed during an interactive user session, which requires that the target computer be allowed to log on automatically using a specified administrative account.
If a Group Policy object GPO is in place that enforces a logon security banner, this automatic logon will not be allowed to proceed, because the security banner halts the logon process while it waits for a user to accept the stated policy.
When you add computers to the domain, specify that they be added to an OU that is not affected by a GPO that enforces a logon security banner. In the Task Sequence Editor, include as one of the last task sequence steps a script that relocates the computer account to the desired OU.
Problem: You created an image of a computer that was joined to the domain. While deploying the new image to a target computer, the deployment process halts, because auto-logon does not occur and the user is prompted to enter appropriate credentials.
The deployment process resumes when the credentials are provided and the user is logged on. Possible Solution: When capturing images, the source computer should not be joined to a domain.
If the computer was joined to a domain, join the computer to a workgroup, re-capture the image, and attempt the deployment to a target computer to determine whether the issue is resolved. Problem: While deploying to a target computer that is equipped with Intel vPro technology, the deployment may end with a stop error.
Even though all updated drivers have been included as out-of-box drivers in the Deployment Workbench, the target computer does not start. Errors generated as a result of improperly configured firewalls on database server as described in Blocked SQL Server Browser Requests.
Errors generated as a result of broken connections with the database server as described in Named Pipe Connections. However, errors might be generated that relate to an improperly configured firewall on the database server. However, if the firewall is configured incorrectly, attempts to connect to a SQL Server instance may be blocked. However, errors might be generated that relate to broken SQL Server connections. Also, specify the SQLShare property, which it is required when making a connection to an external database using named pipes.
When connecting using named pipes, use integrated security to make the connection to the database. In the case of LTI deployments, the user account that you specify makes the connection to the database. For ZTI deployments that use Configuration Manager, the network access account connects to the database. Because Windows PE has no security context by default, you must make a network connection to the database server to establish a security context for the user who will be making the connection.
The network share that the SQLShare property specifies provides a means to connect to the server to gain a proper security context. You must have Read access to the share. When the connection is made, you can then establish the named pipe connection to the database. Enable named pipe connections by performing the following tasks based on the version of SQL Server you are using:.
For Windows only , MongoDB 4. The mongod fails to start if it encounters an encrypted PEM file. To securely store and access a certificate for use with TLS on Windows, use net. Use the net. In all cases, the mongos or mongod will redact the password from all logging and reporting output.
In MongoDB 4. A sequence of bytes, expressed as hexadecimal, used to identify a public key by its SHA-1 digest. The thumbprint is sometimes referred to as a fingerprint. The mongod searches the operating system's secure certificate store for the CA certificates required to validate the full certificate chain of the specified TLS certificate. Specifically, the secure certificate store must contain the root CA and any intermediate CA certificates required to build the full certificate chain to the TLS certificate.
Do not use net. CAFile or net. For example, if the TLS certificate was signed with a single root CA certificate, the secure certificate store must contain that root CA certificate. If the TLS certificate was signed with an intermediate CA certificate, the secure certificate store must contain the intermedia CA certificate and the root CA certificate.
You cannot use the rotateCertificates command or the db. Specifies a certificate property to select a matching certificate from the operating system's secure certificate store to use for internal x.
The mongod searches the operating system's secure certificate store for the CA certificates required to validate the full certificate chain of the specified cluster certificate. Specifically, the secure certificate store must contain the root CA and any intermediate CA certificates required to build the full certificate chain to the cluster certificate.
For example, if the cluster certificate was signed with a single root CA certificate, the secure certificate store must contain that root CA certificate. If the cluster certificate was signed with an intermediate CA certificate, the secure certificate store must contain the intermediate CA certificate and the root CA certificate.
See x. If net. To securely store and access a certificate for use with membership authentication on Windows, use net. Specify the file name of the. CAFile is set. CAFile option. Starting in 4. See net. When using the secure store, you do not need to, but can, also specify the net. For clients that present a certificate, however, mongos or mongod performs certificate validation using the root certificate chain specified by CAFile and reject clients with invalid certificates.
Enable or disable the validation checks for TLS certificates on other servers in the cluster and allows the use of invalid certificates to connect. If you specify --tlsAllowInvalidCertificates or tls. When using the net. Prevents a MongoDB server running with TLS from accepting incoming connections that use a specific protocol or protocols. To specify multiple protocols, use a comma separated list of protocols.
To enable the disabled TLS 1. See Disable TLS 1. Disallow Protocols. Your system must have a FIPS compliant library to use the net. FIPSMode option. Instructs mongos or mongod to log a message when a client connects using a specified TLS version. To instruct mongos or mongod to log a message when a client connects using either TLS 1.
All SSL options are deprecated since 4. Deprecated since version 2. With net. By default, net. Deprecated since version 4. Starting in version 3. To use x. CAFile must be specified unless you are using --tlsCertificateSelector or --net. PEMKeyFile and net.
PEMKeyFile or net. The password to de-crypt the certificate-key file i. PEMKeyPassword option only if the certificate-key file is encrypted. If the cluster certificate was signed with an intermediate CA certificate, the secure certificate store must contain the intermedia CA certificate and the root CA certificate. The password to de-crypt the x. CAFile instead. CRLFile instead. Use net. FIPSMode instead. Specifies the default compressor s to use for communication between this mongod or mongos instance and:.
In versions 3. To disable network compression, set the value to disabled. Messages are compressed when both parties enable network compression.
Otherwise, messages between the parties are uncompressed. If you specify multiple compressors, then the order in which you list the compressors matter as well as the communication initiator. For example, if mongosh specifies the following network compressors zlib,snappy and the mongod specifies snappy,zlib , messages between mongosh and mongod uses zlib.
If the parties do not share at least one common compressor, messages between the parties are uncompressed. For example, if mongosh specifies the network compressor zlib and mongod specifies snappy , messages between mongosh and mongod are not compressed.
The path to a key file that stores the shared secret that MongoDB instances use to authenticate to each other in a sharded cluster or replica set. The YAML format accepts content of:. The YAML format is compatible with the existing single-key keyfiles that use the text file format.
The authentication mode used for cluster authentication. If you use internal x. This option can have one of the following values:. The security.
New in version 3. Used for performing rolling transition of replica sets or sharded clusters from a no-auth configuration to internal authentication. Requires specifying a internal authentication mechanism such as security. For example, if using keyfiles for internal authentication , the mongod or mongos creates an authenticated connection with any mongod or mongos in the deployment using a matching keyfile.
If the security mechanisms do not match, the mongod or mongos utilizes a non-authenticated connection instead. A mongod or mongos running with security. Users may connect to your deployment without any access control checks and perform read, write, and administrative operations. A mongod or mongos running with internal authentication and without security. Update clients to connect to the mongod or mongos using the appropriate user prior to restarting mongod or mongos without security.
Enables or disables server-side JavaScript execution. In earlier versions, the setting is only available for mongod. This prevents the mongod or mongos from writing potentially sensitive data stored on the database to the diagnostic log.
Metadata such as error or operation codes, line numbers, and source file names are still visible in the logs. Use security. The mongod or mongos logs events such as those related to CRUD operations, sharding metadata, etc. It is possible that the mongod or mongos may expose PII as a part of these logging operations. Diagnostics on a mongod or mongos running with security.
See the process logging manual page for an example of the effect of security. On a running mongod or mongos , use setParameter with the redactClientLogData parameter to configure this setting. If the IP address is not present, the server does not authenticate the mongod or mongos.
Ensure security. Deprecated in version 5. You must set to true to pass in encryption keys and configurations. This cipher is now available only on Linux. The path to the local keyfile when managing keys via process other than KMIP. Only set when managing keys via process other than KMIP. Requires security. Include to use the key associated with the identifier as the system key. You can only use the setting the first time you enable encryption for the mongod instance.
If the KMIP server cannot locate a key with the specified identifier or the data is already encrypted with a key, MongoDB will throw an error. On startup, the mongod will attempt to establish a connection to each server in the order listed, and will select the first server to which it can successfully establish a connection.
KMIP server selection occurs only at startup. When connecting to a KMIP server, the mongod verifies that the specified security. Port number to use to communicate with the KMIP server. If specifying multiple KMIP servers with security.
Requires that a security. See security. The password to decrypt the client certificate i. Use the option only if the certificate is encrypted. Available on Windows and macOS as an alternative to security.
Specifies a certificate property in order to select a matching certificate from the operating system's certificate store to authenticate MongoDB to the KMIP server. When using the secure store, you do not need to, but can, also specify the security. How many times to retry the initial connection to the KMIP server.
Use together with connectTimeoutMS to control how long the mongod waits for a response between each retry. Timeout in milliseconds to wait for a response from the KMIP server.
If the connectRetries setting is specified, the mongod will wait up to the value specified with connectTimeoutMS for each retry.
A fully qualified server domain name for the purpose of configuring SASL and Kerberos authentication. Registered name of the service using SASL. This option allows you to override the default Kerberos service name component of the Kerberos principal name, on a per-instance basis.
If unspecified, the default value is mongodb. MongoDB permits setting this option only at startup. The setParameter can not change this setting.
Ensure that your driver supports alternate service names. The path to the UNIX domain socket file for saslauthd. The LDAP server against which the mongod or mongos authenticates users or determines what actions a user is authorized to perform on a given database.
Define PHP timezone e. Add firewall rules only if firewalld is enabled f. Activate processes. After attempting to connect, follow the steps described in Centreon documentation here. Disable SELinux b. Add firewall rules f. Release Date Documentation Centreon Web is commonly called Centreon. This is the Centreon web interface, configuration management of demons to monitor resources.
Before downloading Centreon, please validate that you can meet the prerequisites. If this is not the case, consider using our turnkey solution iso installation system in the "Appliances" tab that lets you install supervision platform very easily. Display hosts listing in the Centreon home with filters, columns selection and organise your specifics views. Note how you tolerate potential changes in the style attribute's value or switch from using double quotes to single for class attribute:.
There is a soft limit to keep lines of code under 80 characters long. This means it should be respected if possible and if it does not make readability and code maintenance worse. For example, you should never split long string literals like URLs or some other often copied entities over multiple lines to fit this limit:.
Extracting variables is acceptable for reducing code duplication and improving readability of complex expressions. However, you should avoid extracting variables used only once and moving them to opposite parts of the extractor file, which makes reading the linear flow difficult.
Multiple fallback values can quickly become unwieldy. Collapse multiple fallback values into a single expression via a list of patterns.
Use them for string to number conversions as well. If you encounter any problems parsing its output, feel free to create a report. From a Python program, you can embed youtube-dl in a more powerful fashion, like this:. Most likely, you'll want to use various options. For a start, if you want to intercept youtube-dl's output, set a logger object. Unless you were prompted to or there is another pertinent reason e. GitHub fails to accept the bug report , please do not send bug reports via personal email.
For discussions, join us in the IRC channel youtube-dl on freenode webchat. Please include the full output of youtube-dl when run with -v , i. It should look similar to this:. Do not post screenshots of verbose logs; only plain text is acceptable. The output including the first lines contains important debugging information. Issues without the full output are often not reproducible and therefore do not get solved in short order, if ever. Please re-read your issue once again to avoid a couple of common mistakes you can and should use this as a checklist :.
We often get issue reports that we cannot really decipher. While in most cases we eventually get the required information after asking back multiple times, this poses an unnecessary drain on our resources. Many contributors, including myself, are also not native speakers, so we may misread some parts.
So please elaborate on what feature you are requesting, or what bug you want to be fixed. Make sure that it's obvious. If your report is shorter than two lines, it is almost certainly missing some of these, which makes it hard for us to respond to it.
We're often too polite to close the issue outright, but the missing info makes misinterpretation likely. As a committer myself, I often get frustrated by these issues, since the only possible way for me to move forward on them is to ask for clarification over and over. For bug reports, this means that your report should contain the complete output of youtube-dl when called with the -v flag. The error message you get for most bugs even says so, but you would not believe how many of our bug reports do not contain this information.
If your server has multiple IPs or you suspect censorship, adding --call-home may be a good idea to get more diagnostics. Site support requests must contain an example URL. There should be an obvious video present. Except under very special circumstances, the main page of a video service e. Before reporting any issue, type youtube-dl -U. This should report that you're up-to-date.
This goes for feature requests as well. Make sure that someone has not already opened the issue you're trying to open. Search at the top of the window or browse the GitHub Issues of this repository. If there is an issue, feel free to write something along the lines of "This affects me as well, with version Here is some more information on the issue While some issues may be old, a new post into them often spurs rapid activity.
Before requesting a new feature, please have a quick peek at the list of supported options. Many feature requests are for features that actually exist already! Please, absolutely do show off your work in the issue report and detail how the existing similar options do not solve your problem. People want to solve problems, and often think they do us a favor by breaking down their larger problems e.
However, what often happens is that they break down the problem into two steps: One simple, and one impossible or extremely complicated one. We are then presented with a very complicated request when the original problem could be solved far easier, e. To avoid this, you must include the greater context where it is non-obvious.
In particular, every feature request that does not consist of adding support for a new site should contain a use case scenario that explains in what situation the missing feature would be useful.
Some of our users seem to think there is a limit of issues they can or should open. There is no limit of issues they can or should open. While it may seem appealing to be able to dump all your issues into one ticket, that means that someone who solves one of your issues cannot mark the issue as closed. Typically, reporting a bunch of issues leads to the ticket lingering since nobody wants to attack that behemoth, until someone mercifully splits the issue into multiple ones.
In particular, every site support request issue should only pertain to services at one site generally under a common domain, but always using the same backend technology. Do not request support for vimeo user videos, White house podcasts, and Google Plus pages in the same issue. Also, make sure that you don't post bug reports alongside feature requests. As a rule of thumb, a feature request does not include outputs of youtube-dl that are not immediately related to the feature at hand.
Do not post reports of a network error alongside the request for a new video service. Only post features that you or an incapacitated friend you can personally talk to require. Do not post features because they seem like a good idea. If they are really useful, they will be requested by someone who requires them. It may sound strange, but some bug reports we receive are completely unrelated to youtube-dl and relate to a different, or even the reporter's own, application.
Please make sure that you are actually using youtube-dl. If you are using a UI for youtube-dl, report the bug to the maintainer of the actual application providing the UI.
On the other hand, if your UI for youtube-dl fails in some way you believe is related to youtube-dl, by all means, go ahead and report the bug. Skip to content. Star k. Unlicense License. Branches Tags. Could not load branches. Could not load tags. Latest commit. B0pol [peertube] only call description endpoint if necessary Git stats 18, commits. Failed to load latest commit information.
Jun 5, Nov 29, Jan 4, May 16, Apr 20, Jul 1, Aug 5, Credit adrianheine for
0コメント